Αναζήτηση
Κανένα προϊόν
Θα καθοριστεί Αποστολή
0,00 € Σύνολο
Το προϊόν προστέθηκε με επιτυχία στο καλάθι αγορών σας
Ποσότητα
Σύνολο
Υπάρχουν 0 αντικείμενα στο καλάθι σας. Υπάρχει ένα προϊόν στο καλάθι σας.
Σύνολο προϊόντων
Σύνολο μεταφορικών Θα καθοριστεί
Σύνολο (με Φ.Π.Α.).
The RTV silicone rubber is a neutral and transparent one-component RTV silicone rubber to absorb moisture in
the air at room temperature curing . With non-toxic , non-polluting , non-corrosive , anti-aging , moisture ,
excellent electrical insulation and arc resistance characteristics, and have good adhesive properties . Long-term use in the temperature range of -60 C - 200 C, stable performance, mainly used for perfusion sealed electronic components , play a moisture-proof , sealed , shock , so as to achieve stable performance of the role .
Application:
Since the curing of the RTV silicone rubber -like elastic body is transparent , the need for a transparent optical adhesive seal material , because a certain adhesion can be used for encapsulating electronic components and small output transformer and TV industry sealed against moisture , seal , so as to achieve stable performance seismic effects . SCR table can be used as protection , optical instruments require transparent adhesive seal , electronics, communications equipment moisture seal to protect the paint coating , transistors and silicon diodes and protection coatings.
Usage:
After the components for general cleaning , cutting nozzle sleeve beak , extrusion gel , adhesive bonding. At room temperature 25 C, 50% humidity environment , 24 hours curing depth of 2-3 mm. As gluing area, longer curing adhesive thickness , the longer the storage time at room temperature , the better the adhesion . Components such as temperature may be placed in the fully cured layer 50 C - 150 C drying in a room temperature according to any of 4 to 12 hours , and the adhesion strength can reach better results .
Note:
1 , the temperature component may be cured at room temperature , then at 50 C- 100 C, moist oven for 4 to 8 hours , which turns off the low-molecular material , sufficiently cured to ensure that the adhesive performance .
2 , when the RTV silicone rubber potting , a thickness of not much accumulation , if 3mm, can be layered watering gradually curing method , the greater the accumulation of glue thickness , the longer the time to fully cure .
The RTV silicone rubber after use , the hose should be tightly closed , save again .
